Zeror.ai Error Codes ABB 2281

ABB 2281

Brand: ABBModel: ACS880Error code: 2281

What the Fault Means

Fault: Calibration

Likely causes

  • Measured offset of output phase current measurement or difference between output phase U2 and W2 current measurement is too great (the values are updated during current calibration).

Solution and Safe First Checks

  1. Try performing the current calibration again (select Current measurement calibration at parameter 99.13). If the fault persists, contact your local ABB representative.

Safety: do not work inside the panel without isolating the power; if unsure, consult a qualified technician.

Related ABB error codes

Source: the Zeror.ai industrial fault database and ABB technical documentation. This page is for information; on critical systems follow the manufacturer's manual and authorised service.

ABB 2281 · Zeror.ai