Zeror.ai Error Codes Siemens F40836

Siemens F40836

Brand: SiemensModel: SINAMICS G120 CU250S2Error code: F40836

What the Fault Means

Fault: CX32 DRIVE-CLiQ: Send error for DRIVE-CLiQ data

Likely causes

  • A DRIVE-CLiQ communications error has occurred from the Control Unit to the controller extension involved
  • Data were not able to be sent
  • Fault cause: 65 (= 41 hex): Telegram type does not match send list
  • Note regarding the message value: The individual information is coded as follows in the message value (r0949/r2124): 0000yyxx hex: yy = component number, xx = error cause

Solution and Safe First Checks

  1. Carry out a POWER ON (switch-off/switch-on).

Safety: do not work inside the panel without isolating the power; if unsure, consult a qualified technician.

Related Siemens error codes

Source: the Zeror.ai industrial fault database and Siemens technical documentation. This page is for information; on critical systems follow the manufacturer's manual and authorised service.

Siemens F40836 · Zeror.ai