Zeror.ai Error Codes KUKA Start point equal to end point

KUKA Start point equal to end point

Brand: KUKAModel: KRC SystemError code: Start point equal to end point

What the Fault Means

Start point equal to end point

Likely causes

  • - Distance between start point and end point is too small.

Solution and Safe First Checks

  1. - Reprogram start point and/or end point.
  2. - Acknowledge message.

Safety: do not work inside the panel without isolating the power; if unsure, consult a qualified technician.

Detailed diagnosis with AIAnalyse this code step by step for your own machineConnect to an expert engineerLive engineer support if it is not solved

Related KUKA error codes

KRC2-1163Axis coupling not possible (--> DSE/PM--Channel assignment)General system air pressureGeneral system air pressureKSS-00289PC Fan Hatası (Kritik)KRC2-2927Ackn. RMS current too high <power module number>KRC2-203General motion enableKRC2-230Wrong drives parameter <axis number> <parameter set no.>

Source: the Zeror.ai industrial fault database and KUKA technical documentation. This page is for information; on critical systems follow the manufacturer's manual and authorised service.

KUKA Start point equal to end point · Zeror.ai