Zeror.ai Error Codes Samkoon 0x150

Samkoon 0x150

Brand: SamkoonModel: SK serisi (ör. SK-070AE)Error code: 0x150

What the Fault Means

Penetrating data-Write clock-No data returned — Geçişli (pass-through) kanal, saat (RTC) yazma: karşı taraftan yanıt dönmedi (zaman aşımı).

Likely causes

  • PLC enerjisiz veya RUN konumunda değil; kablo kopuk ya da yanlış porta takılı; istasyon adresi, baud hızı veya protokol uyuşmazlığı; zaman aşımı süresinin çok kısa ayarlanması; Ethernet bağlantısında hatalı IP veya port.

Solution and Safe First Checks

  1. PLC'nin enerjili ve RUN'da olduğunu, kablonun doğru porta takıldığını doğrulayın; istasyon adresi, baud hızı ve protokol ayarlarını iki tarafta eşitleyin; zaman aşımı süresini (LW60307 / LW60322) ve yeniden deneme sayısını (LW60305 / LW60320) artırın; haberleşme durum biti LB60107 / LB60108 üzerinden bağlantıyı izleyin.

Safety: do not work inside the panel without isolating the power; if unsure, consult a qualified technician.

Related Samkoon error codes

Source: the Zeror.ai industrial fault database and Samkoon technical documentation. This page is for information; on critical systems follow the manufacturer's manual and authorised service.

Samkoon 0x150 · Zeror.ai