Zeror.ai Error Codes Siemens F32135

Siemens F32135

Brand: SiemensModel: SINAMICS G120 CU250S2Error code: F32135

What the Fault Means

Fault: Encoder 2: Fault when determining the position

Likely causes

  • The encoder supplies status information bit by bit in an internal status/fault word
  • Some of these bits cause this fault to be triggered
  • Other bits are status displays
  • The status/fault word is displayed in the fault value

Solution and Safe First Checks

  1. determine the detailed cause of the fault using the fault value.
  2. replace the encoder if necessary.

Safety: do not work inside the panel without isolating the power; if unsure, consult a qualified technician.

Detailed diagnosis with AIAnalyse this code step by step for your own machineConnect to an expert engineerLive engineer support if it is not solved

Related Siemens error codes

OB 82Diagnostic interrupt from I/O module0x0A00CPU in STOP due to memory overflow16#0202PWM Çıkış Yapılandırma HatasıF003Düşük gerilim - DC bara gerilimi limitin altındaA03520Sıcaklık sensörü hatasıCPU-STOPCPU STOP moduna geçti - program çalışmıyor

Source: the Zeror.ai industrial fault database and Siemens technical documentation. This page is for information; on critical systems follow the manufacturer's manual and authorised service.

Siemens F32135 · Zeror.ai